make menuconfig 或 make menuconfig. 在 Networking options 部分, 启用下边的选项:
[*] Network packet filtering (replaces ipchains) [ ] Network packet filtering debugging (NEW) <*> 802.1d Ethernet Bridging [*] netfilter (firewalling) support (NEW)
iptables 不会工作.
[ ] Network packet filtering debugging (NEW)
make-kpkg to create a custom Debian kernel package you can install on your server using dpkg. Once the new kernel is compiled and installed, install the bridge-utils package.
Internet ---- router ( 62.3.3.25 ) ---- bridge (62.3.3.26 gw 62.3.3.25 / 192.168.0.1)
|
|
|---- WWW Server (62.3.3.27 gw 62.3.3.25)
|
|
LAN --- Zipowz (192.168.0.2 gw 192.168.0.1)
# Create the interface br0 /usr/sbin/brctl addbr br0 # Add the Ethernet interface to use with the bridge /usr/sbin/brctl addif br0 eth0 /usr/sbin/brctl addif br0 eth1 # Start up the Ethernet interface /sbin/ifconfig eth0 0.0.0.0 /sbin/ifconfig eth1 0.0.0.0 # Configure the bridge ethernet # The bridge will be correct and invisible ( transparent firewall ). # It's hidden in a traceroute and you keep your real gateway on the # other computers. Now if you want you can config a gateway on your # bridge and choose it as your new gateway for the other computers. /sbin/ifconfig br0 62.3.3.26 netmask 255.255.255.248 broadcast 62.3.3.31 # I have added this internal IP to create my NAT ip addr add 192.168.0.1/24 dev br0 /sbin/route add default gw 62.3.3.25
Internet ---- router (62.3.3.25) ---- bridge (62.3.3.26)
|
|
|---- WWW Server (62.3.3.28 gw 62.3.3.25)
|
|
|---- Mail Server (62.3.3.27 gw 62.3.3.25)
# Create the interface br0 /usr/sbin/brctl addbr br0 # Add the Ethernet interface to use with the bridge /usr/sbin/brctl addif br0 eth0 /usr/sbin/brctl addif br0 eth1 # Start up the Ethernet interface /sbin/ifconfig eth0 0.0.0.0 /sbin/ifconfig eth1 0.0.0.0 # Configure the bridge Ethernet # The bridge will be correct and invisible ( transparent firewall ). # It's hidden in a traceroute and you keep your real gateway on the # other computers. Now if you want you can config a gateway on your # bridge and choose it as your new gateway for the other computers. /sbin/ifconfig br0 62.3.3.26 netmask 255.255.255.248 broadcast 62.3.3.31
ssh 访问网桥, 则必须拥有一个网关,或者首先联接到其它服务器, 如"邮件服务器". 然后通过内部网卡联接到网桥.
例 B.1. Basic Iptables rules
iptables -F FORWARD iptables -P FORWARD DROP iptables -A FORWARD -s 0.0.0.0/0.0.0.0 -d 0.0.0.0/0.0.0.0 -m state --state INVALID -j DROP iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT # Some funny rules but not in a classic Iptables sorry ... # Limit ICMP # iptables -A FORWARD -p icmp -m limit --limit 4/s -j ACCEPT # Match string, a good simple method to block some VIRUS very quickly # iptables -I FORWARD -j DROP -p tcp -s 0.0.0.0/0 -m string --string "cmd.exe" # Block all MySQL connection just to be sure iptables -A FORWARD -p tcp -s 0/0 -d 62.3.3.0/24 --dport 3306 -j DROP # Linux Mail Server Rules # Allow FTP-DATA (20), FTP (21), SSH (22) iptables -A FORWARD -p tcp -s 0.0.0.0/0 -d 62.3.3.27/32 --dport 20:22 -j ACCEPT # Allow the Mail Server to connect to the outside # Note: This is *not* needed for the previous connections # (remember: stateful filtering) and could be removed. iptables -A FORWARD -p tcp -s 62.3.3.27/32 -d 0/0 -j ACCEPT # WWW Server Rules # Allow HTTP ( 80 ) connections with the WWW server iptables -A FORWARD -p tcp -s 0.0.0.0/0 -d 62.3.3.28/32 --dport 80 -j ACCEPT # Allow HTTPS ( 443 ) connections with the WWW server iptables -A FORWARD -p tcp -s 0.0.0.0/0 -d 62.3.3.28/32 --dport 443 -j ACCEPT # Allow the WWW server to go out # Note: This is *not* needed for the previous connections # (remember: stateful filtering) and could be removed. iptables -A FORWARD -p tcp -s 62.3.3.28/32 -d 0/0 -j ACCEPT